Setting the D-Link Wireless LAN

Basically every Figuring or any office that uses Network .. either Local Area Network and Wireless Area Network .. Also and also the Metropolitan Area Network .. Here I will mention a little about ... Perform Installation and Wireless LAN Settings .. Although many have discussed about the setting and installation but I wanted to share what I know and I learned ...
Easy - I hope can be useful for me and my readers of course ..

a. Installation steps Wireless Card:
1. Enter the CD Driver D-Link Wireless Card
2. After the image appears Installer, then click Install Driver like the picture
below:




3. Once in the select it will appear Cheking Operating System such as the view below:



4. Then we will go ketahap installation and will display a screen similar to:



5. Click Next to do the installation:


6. After that will appear below the display like this:



7. From the above we will look at the driver put penginstallannya which, like the display above the installation will be in atruh on drive E:
8. Click Next



9. After the click will display a screen similar to:



10. After that the display appears as below:



11. Once the setup is marked that expired pengisntallan
12. Select Yes. I Want to Restart My Computer Now to restart the computer.
13. Click Finish to end installation
14. After restarting the computer will display appears as follows:



15. Click FINISH to end the installation



b. Setting steps WLAN Card
1. Right click on the icon WLAN D-Link and Select "Wireless Settings"



2. At the beginning click status, Select Infrastructure



3. Fill SSID (Example: 3Com) and Chanel (Eg: 11), to remember writing letters on the SSID in the WLAN big or small would be considered different and dangat influential.



4. After that, click Apply
5. Click IP Settings, to configure the IP will display appears as follows:



6. Click Advanced and enter into channel 11-channel ad hoc



7. Click on the site survey → click on the names are in profile → click refresh



c. Step 2 to find out if your PC is already connected to the PC 1, are as follows:
1. Click Start
2. Click Run
3. Just type cmd / command to go kepengetikan ping or by typing ping-t (no IP Address PC 1) Examples of ping-t 192.168.1.1 ENTER, it would appear



Figure 01

4. If undetected it will look like picture 01 above.
5. If connected, the image will appear as:




2.6 Setting up and Running Internet

Step - step setting up and running the internet:

1. click the Internet Explorer icon on the desktop or start menu



2. Then go to internet explorer window



3. Then select the tools menu> Internet Options, then the display will appear as:



4. then click on LAN Settings, then the display appears as:
- Fill in the address box (IP PC-1), for example 192.168.1.2, then OK



5. after setting the Internet option to do testing with www.google.co.id then type the site address will appear as: